Hummel Gas Pump Co. Ltd.

Red Jacket -
Submersible Turbine Pump

Innovative technology delivers the easiest and safest pump to install and service. The Red Jacket Submersible Turbine Pump incorporates a range of innovative new features that keep the safety of service technicians and service related costs in mind. If you're concerned about rising labor costs and the safety of your workforce, take a look at The Red Jacket Submersible Turbine Pump.

Features & Benefits

Red Jacket

Service spill elimination
- Innovative Check Valve design.
  The Check Valve on the Red Jacket
  Submersible Turbine Pump has been designed so that it can be raised, providing a larger path to depressurize the line and return fuel to the tank. This feature eliminates the potential for fuel spills.
- Spill-free extractable
  When the two nuts holding the extractable in place are backed off, the o-ring seals are automatically broken, releasing pressure in the pump and the non-isolated line, draining fuel back into the tank. This simple feature helps eliminate potential human error that could cause service spills, protecting the environment from fuel contamination, and site owners from related liability.
Vacuum monitoring applications
- Red Jacket Vacuum Sensor - Siphon System
  The Red Jacket Vacuum Sensor Siphon System is a monitoring-grade siphon system. It is designed specifically for use in vacuum monitoring applications, and to integrate with Veeder-Root vacuum sensors. The pump offers two siphon system ports. The Red Jacket Vacuum Sensor Siphon System incorporates a redesigned one-piece rubber Check Valve with an in-line filter screen that reduces the clogs and failures that can cause false alarms and downtime in vacuum monitoring applications. Line leak detection Veeder-Root/Red Jacket industry leading pressurized line leak detection (PLLD) provides environmental compliance without the fuel flow restrictions of mechanical (MLLD) or electronic (ELLD) systems.
Yoke assembly: quick, simple and safe electrical connections
- Current safety practice when servicing existing submersible pumps requires turning off the circuit breaker, backing off the bolts by up to one inch, and then manually pulling the electrical yoke connection apart. When service is complete, the technician has to force the connection back in place.With The Red Jacket Submersible Turbine Pump you turn off the circuit breaker, then simply back off the two nuts holding the extractable in place and the yoke electrical connection is broken. After service is complete, the electrical circuit reconnects when the two nuts are retightened. Safe, simple and easy.
Extractable: easy to install and service
The Red Jacket Submersible Turbine Pump’s design incorporates industrial die springs that break loose the o-ring seals when the nuts holding the extractable in place are removed. No physical effort or special equipment is required to break the seal, unlike competitive systems that can require considerable force. In addition, all connected parts have been moved to the manifold; so there is no need to remove parts, leak detectors or siphons when service or upgrades require removing the extractable.
Manifold allows for vertical or horizontal discharge
The Red Jacket Submersible Turbine Pump has been designed for vertical product discharge, but with adequate swinging radius to allow for the addition of an elbow to accommodate a side discharge. In fact, the discharge is now located higher on the manifold so that a side discharge is on the same plane as the rest of the pump.
Built-in contractor’s box
The electrical connection housing (Contractor’s Box) is built into the manifold of The Red Jacket Submersible Turbine Pump, and is completely isolated from the fuel path. Unlike existing systems, there is no adjustment required to fit the yoke, making this pump the easiest to install.

Designed for Hazardous Location:
Class 1, Group D atmospheres
Quick-Set Adjustment Range:
RJ 1 = 60" - 90"
RJ 2 = 90" - 150"
RJ 3 = 150" - 210"
Agency Listing:
UL
cUL
ATEX Certified
4" Horsepowers

Available:
1/3 HP, 60 HZ, 1-phase
3/4 HP, 60 HZ, 1-phase
3/4 HP, 50 HZ, 1-phase or 3-phase
1 1/2 HP, 60 HZ, 1-phase
1 1/2 HP, 50 HZ, 1-phase or 3-phase
X3, 60 HZ, 1-phase
X4, 50 HZ, 1-phase or 3-phase
2 HP, CPT, 1-phase or 3-phase
2 HP, 60 HZ, 1-phase